Application Instruction

• Before use, it should be stirred evenly. It is recommended to use an A2 or A3 toothed scraper to evenly apply and scrape. According to the temperature and humidity at the construction site, wait for about 10 to 20 minutes (with a noticeable feeling of wire drawing by hand) before laying the floor.

• After laying the floor, use a soft wooden board to exhaust and push the floor flat, and then use a 50kg roller to roll on the laid floor to ensure that all the glue adheres to the back of the floor.

• The adhesive will be dried after 24h, and set to foot traffic after 48h.

Theoretical application rate

A2 toothed trowel: 300-350g/m²     A3 toothed trowel: 250-300g/m²

Quality Grarantee Period

12 months if stored in 1-40℃.

Notes

The product should be protected against frost and direct light during transportation, storage and application.Application temperature should not be lower than 5℃.