Pressure-sensitive elastic floor adhesive NQ300
This product is produced byadvanced technologh and formulation and using importedacrylatepolymers andhigh quanlity pigment and filler. It isnon-toxic and not harmful, belongs to green environment-friendly product.
Contact Us
- +86-17628413411
- +86-17628413411
- lisa@fcpvcfloor.com
- Skype
- +86-13888888888
■ApplicationInstruction：
•Stirthoroughly the product before use,apply it evenly on the surface ofsubstrate by using A2 or A3 toothed trowel. After short open time of 20-40min,the substrate is ready to accept above flooring material.•Afterthe flooring material is applied on the substrate rub the surface by wood plateor roller to remove entranced air under the flooring mate-rial. Make sure thatadhesive has transferred to the back of the flooring material.•Theadhesive will be dried after 24h, and set to foot traffic after 48h.
■Theoreticalapplication rate:
7-9m2/kg
■QualityGraranteePeriod:
12 months if stored in 1-40℃。
■Notes
The product should be protectedagainst frost and direct light during transportation,storage and application.Applicationtemperature should not be lower than 5℃。
Send Email
售前客服
Skype
WhatsApp